Media Server

Log

Use this setting to specify the type of information the Media Server component should put in the Server Log. Usually you should use the Failure (unrecoverable problems only), Major, or Problems levels. When you experience problems with the Media Server component, you may want to set the Log Level setting to Low-Level or All Info: in this case the media processing internals will be recorded in the System Log. When the problem is solved, set the Log Level setting to its regular value, otherwise your System Log files will grow in size very quickly.
The Media Server component records in the System Log are marked with the MEDIA tag.

UDP TOS Tag

Use this setting to specify the TOS tag for all outgoing UDP packets sent with Media Channels. This tag can be used to set the Media traffic priority on your LAN.

Pre-playing

When a Media Channel plays a pre-recorded or pre-composed media data, it can initially send some data portions (packets) "in advance". If later network delays cause some packets to arrive to the remote party with a delay, the "pre-played" media data allow that other party to play data smoothly.
Use this setting to specify how much media data should be "pre-played".

Lingered Playing

PBX Applications often play several media files in a sequence, composing a phrase with several part files. To ensure smooth media parts "merging", a Media Channel reports playing completion when it still has some media data to play. This allows the application to prepare the next media data portion and submit it to the Media Channel for playing.
The Media Channel starts playing this next portion as soon as it actually finishes playing the previous one.
Use this setting to specify when Media Channels should report playing completion.

The Media Server supports a set of audio codecs. The following panel allows you to control how these codecs are used:

There are two Priority settings for each codec - the primary and the secondary one.

When a Media Server composes an initial offer, the codecs are listed sorted by their primary and secondary priority values.
Codecs with the primary Priority set to Inactive or to 1 are not listed in the initial offer.

When a Media Server composes an answer or a non-initial offer, i.e. when the audio codecs supported by the peer are known, only the codecs supported by the peer are listed.
Codecs with the primary Priority set to Inactive are not listed in answeres and non-initial offers.
The Media Server codecs are listed sorted by their primary Priority values. If several Media Server codecs have the same primary Priority values, they are listed in the same order as they were listed in the peer's offer.

Note: the set of supported codecs depends on the platform CommuniGate Pro is running on.

Compressing codecs (such as G.729) require a lot of CPU resources. You may want to offload coding-encoding operations to separate Transcoder servers:

If the Usage setting is set to Transcoder, the Media Server tries to create a transcoder channel on one of the listed Transcoder servers. The peer is instructed to exchange media with the created transcoder channel, while the transcoder channel exchanges media with the CommuniGate Pro Media Server using the PCM (G.711) codec.

Transcoder servers are used in a round-robin manner. If a Transcoder refuses to create a transcoder channel, and there are more than 2 servers specified, the next server is contacted.

The CommuniGate Pro Server software or special CommuniGate Pro Transcoder software can be used to implement Transcoder servers.